Vaculyft E is electrically driven and therefore has a low noise level. Vaculyft E is available in two different variants. Max. load 60 kg/ 100 kg.
Paving stone products
VACULYFT - Handy and flexible machines for laying paving stones.
By using laying machines, you can make economic as well as ergonomic gains. VACULYFT reduces the laying time at the same time as reducing risks for work injuries. VACULYFT is simple to install and you can change tools with a simple manoeuvre and thereby lift everything from most types of paving stones to slabs, kerbstones, natural stones, covers, sacks etc. The machines are available in several different versions. All with specific characteristics to satisfy user needs.
Vaculyft L is equipped with a caterpillar track chassis for easy movement and setting up..
Vaculyft P can be fitted to most types of construction machines.
Vaculyft PM PM is a combined truck/paving machine for easy movement of both machine and material. Simple to fold-up for storage and transportation.
Vaculyft SM 500/1500 lifts loads up to 1500 kg.
Vaculyft SMS 500 is equipped with a vacuum pump of the “super flow” type and can lift most types of concrete/stone! Everything from stone slabs to hewn granite.
Vaculyft PM won the special prize at the 2011 Working environment prize competition at the Building machine and Scanbygg fairs in Gothenburg 2011.
We are agents
for Optimas’ paving stone products!
Our Vaculyft machines are equipped with articulated jib cranes. This provides very good accessibility and easy transport and storage of the machines. As standard, there are a lot of different tools available for lifting the most common kerb and paving stones. Here some of them are shown. The tools are equipped with snap-on couplings which makes it simple to change between different lifting objects.
Call and book a demonstration machine!
Optimas paving stone products
Stone cutter
Part No.: OP49829
With a foldable table for clean cuts..
Stone cart
Part No.: OP49534
Transport device for vertically stacked stone layers.
Joint filling device Mini
Part No.: OP49638
Fills joints quickly and efficiently!
Tandem-kerbstone cramp
Part No.: OP47098
From 50–118 cm.
Lengthwise
Suitable when the kerbstones are of the same length.
Carrying cramp
Part No.: OP47113
Adjustable from 0–50 cm.
Rubber mallet short
Part No.: OP50075
Suitable for adjustment work.
Two pieces replaceable rubber blocks.
Rubber mallet long
Part No.: OP47136
Suitable for adjustment work.
Two pieces replaceable rubber blocks.
Kerbstone cramp, crosswise.
Part No.: OP47104
From 4–26 cm.
Suitable when the kerbstones are of varying length
.
Screed system MINI
Part No.: OP470048
Arbetsbredd 0,25-5,2m
Idealiskt verktyg för att förbereda stensättningen.
Set square
Part No.: OP47007
To check 90 and 45 degrees. Collapsed the set square is 2.5 m x 0.1 m x 0.2 m..
Kerbstone cramp
Part No.: OP47136
Hydraulic cramp for stones, with down-laying.
Concrete plough
Part No.: OP47006
Used for preparing the concrete base when laying kerbstones. The excess is moved to the side.
Extractor-Simplex
Part No.: OP47124
Adjustable from 18–28 cm. Replaceable teeth of spring steel.
H88 TORO
Quick and stable paving machine for laying of mainly larger areas. With a number of accessories that can also be used with other machines, diggers, wheel loaders, etc.
With Vaculyft machines it is easy to replace already laid stones!
Examples of standard tools for kerb and paving stones.
By folding the articulated jib crane it is simple to store and transport the Vaculyft machines.
We also make stationary lifting stations!
Accessories H88 TORO
Hydraulic brushing machine
Part No.: OP47150
Hydraulic brushing machine to brush away excess material from the paved area.
Jointing machine
Part No.: OP47149
Jointing machine for completely filled joints. Can be used with or without water tank.
Water tank
Part No.: OP47151
Accessories for the jointing machine and the hydraulic brushing machine. Holds 1000 litres.
Screed system MAXI
Part No.: OP50750
Working width up to 7.5 m
Ideal tool for preparing the laying of stones.
Optimas paving stone products
Useable machines and tools for laying paving stones.
For SALE: Used Optimas H66 Toro
Hydraulic brushing machine
for construction machinery.
Part No.: OP51761
Hydraulic brushing machine to brush away excess material from the paved area..
Joint filling device for wheel-loader
Part No.: OP48497
Holds 1000 litres.
Used and demo machines for sale!
For SALE: Demo version of kerbstone cramp
Renovation of paving stone surfaces outside the King's hunting lodge. Removal and laying using the Vaculyft L.
Pritec Vaculyft AB is the general agent for Optimas who are the world leaders within paving stone handling. We supplement our own program with Optimas’ machines and products for paving.
Stenteknik AB has today 2 pcs of VACULYFT E and 2 pcs of H88 TORO. Here, H88 TORO for laying surfaces outside Toyota center in Borlänge. Area: 3600 m²
The Off Road pallet lifter for simple movement in tough terrains with a max. load of 1500 kg!
Universal clamping tool
Part No.: OP52318
A mechanical clamping tool that can lift up to 600 kg.
Pritec Vaculyft AB | Fjärås Industriväg 9 | 439 74 FJÄRÅS |Telephone:+46 300-543 543 | Fax: +46 300-540002
